micron-v01

  • ODOs/Battery
  • Tow/EU/Geometry/IDD

Batteries, IMU, odometers and rear 22 Hz transmitter

Long life Batteries Sub-meter accuracy IMU, and 3 independent ODO systems delivering high precision and reliability.  

Tow/Electronic/Geometry/IDD

Tow section, electronic and geometry and IDD module

micron-v02

  • ODOs/Battery/IMU
  • Tow/EU/Geometry/IDD

Batteries, IMU, odometers and rear 22 Hz transmitter

Long life Batteries, Sub-meter accuracy IMU, and 3 independent ODO systems delivering high precision and reliability.

IMU

Sub-Meter Accuracy

Tow/Electronic/Geometry/IDD

Tow section, electronic and geometry and IDD module

micron-v03

  • ODOs/Battery
  • AMFL
  • Tow/EU

Batteries, IMU, odometers and rear 22 Hz transmitter

Long life Batteries Sub-meter accuracy IMU, and 3 independent ODO systems delivering high precision and reliability.  

Patented dual module AMFL Magnetizers

Micron AMFL Magnetizers delivering up to 640 samples per square inch.
  • 40 Hall Effect Sensors per diameter inch.
  • Sensor spacing 0.080” (2.0 mm).
  • Circumferential Crack detection from 0.002“ (50 microns).
  • Pin Hole detection from 0.100” (2500 microns).

Tow and Electronic

micron-v04

  • ODOs/Battery
  • AMFL
  • Tow/EU/Geometry/IDD

Batteries, IMU, odometers and rear 22 Hz transmitter

Long life Batteries Sub-meter accuracy IMU, and 3 independent ODO systems delivering high precision and reliability.  

Patented dual module AMFL Magnetizers

Micron AMFL Magnetizers delivering up to 640 samples per square inch.
  • 40 Hall Effect Sensors per diameter inch.
  • Sensor spacing 0.080” (2.0 mm).
  • Circumferential Crack detection from 0.002“ (50 microns).
  • Pin Hole detection from 0.100” (2500 microns).

Tow/Electronic/Geometry/IDD

Tow section, electronic and geometry and IDD module

micron-v05

This tool configurations reliably detects and sizes pipeline features, metal loss, and mechanical damage. This combo tool also provides precise profiling of mechanical damage every 0.8 inch (20mm) around the circumference of the pipe. The on-board state of the art inertial measurement unit can provide 3.3 ft. (sub-meter) accuracy with references up to 1 mile (1,600m) apart.

  • ODOs/Battery/IMU
  • AMFL
  • Tow/EU/Geometry/IDD

Batteries, IMU, odometers and rear 22 Hz transmitter

Long life Batteries, Sub-meter accuracy IMU, and 3 independent ODO systems delivering high precision and reliability.

IMU

Sub-Meter Accuracy

Patented dual module AMFL Magnetizers

Micron AMFL Magnetizers delivering up to 640 samples per square inch.
  • 40 Hall Effect Sensors per diameter inch.
  • Sensor spacing 0.080” (2.0 mm).
  • Circumferential Crack detection from 0.002“ (50 microns).
  • Pin Hole detection from 0.100” (2500 microns).

Tow/Electronic/Geometry/IDD

Tow section, electronic and geometry and IDD module

micron-v06

  • ODOs/Battery/EU
  • CMFL
  • Tow

ODOs/Battery/EU

Long life Batteries and 3 independent ODO systems delivering high precision and reliability.

Patented Tri-module CMFL Magnetizers

Micron CMFL Magnetizers delivering up to 1000 samples per square inch.
  • 72 Hall Effect Sensors per diameter inch.
  • Sensor spacing 0.043" (1.1 mm).
  • Axial Crack detection from 0.002" (50 microns) under development.
  • Pinhole detection from 0.100" (2500 microns).

Tow Section

Tow section designed for both AMFL & CMFL and long range capabilities. Tow section with front 22 Hz transmitter.

micron-v07

  • ODOs/Battery
  • EU/Geometry/IDD
  • CMFL
  • Tow

Batteries, IMU, odometers and rear 22 Hz transmitter

Long life Batteries Sub-meter accuracy IMU, and 3 independent ODO systems delivering high precision and reliability.  

Electronic, Geometry and IDD

Geometry Module delivering fine resolution and high accuracy. Industry leading Micron IDD sensors for detecting cracking, pin holes and anomalies with high stress concentrations.
  • IDD - Deep Crack detection from 0.002” (50 microns) under development.
  • Geometry - detection from 0.020“ (500 microns).

Patented Tri-module CMFL Magnetizers

Micron CMFL Magnetizers delivering up to 1000 samples per square inch.
  • 72 Hall Effect Sensors per diameter inch.
  • Sensor spacing 0.043" (1.1 mm).
  • Axial Crack detection from 0.002" (50 microns) under development.
  • Pinhole detection from 0.100" (2500 microns).

Tow Section

Tow section designed for both AMFL & CMFL and long range capabilities. Tow section with front 22 Hz transmitter.

micron-v08

This tool configuration uses a circumferential-orientated magnetic field, capable of detecting and quantifying many types of critical and sub-critical flaws that include axial cracking, mechanical damage, narrow axial corrosion, general metal loss and very small diameter corrosion pitting. This combo tool also provides precise profiling of mechanical damage every 0.8 inch (20mm) around the circumference of the pipe. The on-board state of the art inertial measurement unit can provide 3.3 ft. (sub-meter) accuracy with references up to 1 mile (1,600m) apart.

  • ODOs/Battery/IMU
  • EU/Geometry/IDD
  • CMFL
  • Tow

Batteries, IMU, odometers and rear 22 Hz transmitter

Long life Batteries, Sub-meter accuracy IMU, and 3 independent ODO systems delivering high precision and reliability.

IMU

Sub-Meter Accuracy

Electronic, Geometry and IDD

Geometry Module delivering fine resolution and high accuracy. Industry leading Micron IDD sensors for detecting cracking, pin holes and anomalies with high stress concentrations.
  • IDD - Deep Crack detection from 0.002” (50 microns) under development.
  • Geometry - detection from 0.020“ (500 microns).

Patented Tri-module CMFL Magnetizers

Micron CMFL Magnetizers delivering up to 1000 samples per square inch.
  • 72 Hall Effect Sensors per diameter inch.
  • Sensor spacing 0.043" (1.1 mm).
  • Axial Crack detection from 0.002" (50 microns) under development.
  • Pinhole detection from 0.100" (2500 microns).

Tow Section

Tow section designed for both AMFL & CMFL and long range capabilities. Tow section with front 22 Hz transmitter.

micron-v09

  • ODOs/Battery
  • AMFL
  • EU/Geometry/IDD
  • CMFL
  • Tow

Batteries, IMU, odometers and rear 22 Hz transmitter

Long life Batteries Sub-meter accuracy IMU, and 3 independent ODO systems delivering high precision and reliability.  

Patented dual module AMFL Magnetizers

Micron AMFL Magnetizers delivering up to 640 samples per square inch.
  • 40 Hall Effect Sensors per diameter inch.
  • Sensor spacing 0.080” (2.0 mm).
  • Circumferential Crack detection from 0.002“ (50 microns).
  • Pin Hole detection from 0.100” (2500 microns).

Electronic, Geometry and IDD

Geometry Module delivering fine resolution and high accuracy. Industry leading Micron IDD sensors for detecting cracking, pin holes and anomalies with high stress concentrations.
  • IDD - Deep Crack detection from 0.002” (50 microns) under development.
  • Geometry - detection from 0.020“ (500 microns).

Patented Tri-module CMFL Magnetizers

Micron CMFL Magnetizers delivering up to 1000 samples per square inch.
  • 72 Hall Effect Sensors per diameter inch.
  • Sensor spacing 0.043" (1.1 mm).
  • Axial Crack detection from 0.002" (50 microns) under development.
  • Pinhole detection from 0.100" (2500 microns).

Tow Section

Tow section designed for both AMFL & CMFL and long range capabilities. Tow section with front 22 Hz transmitter.

micron-v10

This all-in-one Combo tool uses both Axial and Circumferential magnetic fields, and is capable of detecting and quantifying pipeline features such as general metal loss, pinholes, very small diameter pitting, as well as many types of critical and sub-critical flaws that include axial and circumferential cracking (CSCC), and narrow axial corrosion. This combo tool also provides precise profiling of mechanical damage every 0.8 inch (20mm) around the circumference of the pipe. The on-board state of the art inertial measurement  unit can provide 3.3 ft. (sub-meter) accuracy with references up to 1 mile (1,600m) apart.

  • ODOs/Battery/IMU
  • AMFL
  • EU/Geometry/IDD
  • CMFL
  • Tow

Batteries, IMU, odometers and rear 22 Hz transmitter

Long life Batteries, Sub-meter accuracy IMU, and 3 independent ODO systems delivering high precision and reliability.

IMU

Sub-Meter Accuracy

Patented dual module AMFL Magnetizers

Micron AMFL Magnetizers delivering up to 640 samples per square inch.
  • 40 Hall Effect Sensors per diameter inch.
  • Sensor spacing 0.080” (2.0 mm).
  • Circumferential Crack detection from 0.002“ (50 microns).
  • Pin Hole detection from 0.100” (2500 microns).

Electronic, Geometry and IDD

Geometry Module delivering fine resolution and high accuracy. Industry leading Micron IDD sensors for detecting cracking, pin holes and anomalies with high stress concentrations.
  • IDD - Deep Crack detection from 0.002” (50 microns) under development.
  • Geometry - detection from 0.020“ (500 microns).

Patented Tri-module CMFL Magnetizers

Micron CMFL Magnetizers delivering up to 1000 samples per square inch.
  • 72 Hall Effect Sensors per diameter inch.
  • Sensor spacing 0.043" (1.1 mm).
  • Axial Crack detection from 0.002" (50 microns) under development.
  • Pinhole detection from 0.100" (2500 microns).

Tow Section

Tow section designed for both AMFL & CMFL and long range capabilities. Tow section with front 22 Hz transmitter.